Section
Category: Electrical
Low-voltage distribution gear is specified by the fault level, the current, the poles, and the enclosure it sits in.
-
Fuses and circuit breakers: what the interrupt rating is for
The interrupt rating has to exceed the fault current at that point in the panel. The ampere rating alone does not.
-
How to specify a Rubber Mat
What to put on an RFQ for Rubber Mat: the ratings, documents, and constraints that change the quote.
-
How to specify a Wiring Duct
What to put on an RFQ for Wiring Duct: the ratings, documents, and constraints that change the quote.
-
How to specify a Trunking
What to put on an RFQ for Trunking: the ratings, documents, and constraints that change the quote.
-
How to specify a Surface Mount Box
What to put on an RFQ for Surface Mount Box: the ratings, documents, and constraints that change the quote.
-
How to specify a Ceiling Rose
What to put on an RFQ for Ceiling Rose: the ratings, documents, and constraints that change the quote.
-
How to specify a Pendant Holder
What to put on an RFQ for Pendant Holder: the ratings, documents, and constraints that change the quote.
-
How to specify a Lamp Holder
What to put on an RFQ for Lamp Holder: the ratings, documents, and constraints that change the quote.
-
How to specify an E27 Socket
What to put on an RFQ for E27 Socket: the ratings, documents, and constraints that change the quote.
-
How to specify a GU10 Holder
What to put on an RFQ for GU10 Holder: the ratings, documents, and constraints that change the quote.