A buyer searching for Aluminum Can is usually trying to stop a bad substitute. Packaging is specified by the product it must protect, the distribution test, and the print. The notes below are selection criteria for an Aluminum Can. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Aluminum Can
Packaging is specified by the product it must protect, the distribution test, and the print. For an Aluminum Can, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Aluminum Can is easy to confuse with Blister Pack. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Aluminum Can |
|---|---|
| Recycling | The material claim you are prepared to print. |
| Size | Internal dimensions and the board or film grade. |
| Strength | ECT, burst, or a stated drop and stack test. |
| Barrier | Moisture or grease needs, if any. |
| Colors, the artwork revision, and the barcode. | |
| Closure | Tape, adhesive, or a zipper, and how the line erects it. |
How to compare two offers
Lay both quotes for Aluminum Can on one sheet and line up recycling, size, and strength. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Aluminum Can with a cheaper line that omitted recycling.
Documents worth having before the deposit
Ask for a drawing with flute or film and the dieline. The file should name Aluminum Can and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Sizing the box to the product and forgetting void and drop height.
- Approving artwork without the barcode quiet zone.
- Claiming a recycle mark the local system does not accept.
On an Aluminum Can, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Aluminum Can — Write size, board or film, strength test, and artwork revision.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like IP67 belong
Searches often add a constraint to Aluminum Can: IP67, or explosion-proof / ATEX. Keep those on this page. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Blister Pack.
Questions buyers actually ask
What should an RFQ for Aluminum Can include?
Write size, board or film, strength test, and artwork revision.
Is a cheaper Aluminum Can the same part?
Only if recycling, size, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Aluminum Can they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.