A buyer searching for All Thread is usually trying to stop a bad substitute. A fastener or fitting is specified by size, material, strength, and the corrosion around it. The notes below are selection criteria for an All Thread. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of All Thread
A fastener or fitting is specified by size, material, strength, and the corrosion around it. For an All Thread, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
All Thread is easy to confuse with Lock Nut. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for All Thread |
|---|---|
| Size and thread | Diameter, pitch, length, and the standard of the thread. |
| Material | Steel grade, stainless alloy, or brass, not only the color. |
| Strength | Property class or a stated tensile figure. |
| Head and drive | Head style and the driver the line already uses. |
| Coating | Zinc, galvanize, or another coat matched to the environment. |
| Quantity and lot | Batch traceability if the assembly is safety related. |
How to compare two offers
Lay both quotes for All Thread on one sheet and line up size and thread, material, and strength. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified All Thread with a cheaper line that omitted size and thread.
Documents worth having before the deposit
Ask for the material certificate when the joint is structural. The file should name All Thread and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Substituting a similar head with a lower property class.
- Choosing a coating that the chemical on site strips.
- Leaving thread pitch off the order.
On an All Thread, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “All Thread — Write size, thread, material, property class, and coating.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like IP67 belong
Searches often add a constraint to All Thread: IP67, or waterproof / IP65. Keep those on this page. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Lock Nut.
Questions buyers actually ask
What should an RFQ for All Thread include?
Write size, thread, material, property class, and coating.
Is a cheaper All Thread the same part?
Only if size and thread, material, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For All Thread they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.