A buyer searching for Wallet Case is usually trying to stop a bad substitute. A phone accessory is specified by the phone interface, the mechanical fit, and the electrical rating of the cable or charger. Fitment adjectives are not a specification. The notes below are selection criteria for a Wallet Case. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Wallet Case
A phone accessory is specified by the phone interface, the mechanical fit, and the electrical rating of the cable or charger. Fitment adjectives are not a specification. For a Wallet Case, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Wallet Case is easy to confuse with Wireless Charger. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Wallet Case |
|---|---|
| Materials | Skin contact materials, and a flammability note for anything that charges. |
| Cycle life | Bends for a cable, or open-close cycles for a mount. |
| Markets | The plug and the radio or charger approvals for the countries of sale. |
| Interface | USB-C, Lightning, or a magnetic alignment, and the current the cable is allowed to carry. |
| Mechanical fit | Phone size range, case compatibility, and how it locks in a vehicle or on a desk. |
| Electrical rating | Watts or amps, and whether USB Power Delivery is required. |
How to compare two offers
Lay both quotes for Wallet Case on one sheet and line up materials, cycle life, and markets. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Wallet Case with a cheaper line that omitted materials.
Documents worth having before the deposit
Ask for a compatibility list by phone model, not a photo of one handset. The file should name Wallet Case and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Assuming every USB-C cable can charge at the wattage printed on the adapter.
- Specifying a car mount without the vent, dash, or vent-clip mechanical limit.
- Ignoring the case thickness the buyer’s phone will actually wear.
On a Wallet Case, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Wallet Case — Name the connector, the current, the phones it must fit, and the mechanical mount.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like waterproof / IP65 belong
Searches often add a constraint to Wallet Case: waterproof / IP65, or explosion-proof / ATEX. Keep those on this page. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Wireless Charger.
Questions buyers actually ask
What should an RFQ for Wallet Case include?
Name the connector, the current, the phones it must fit, and the mechanical mount.
Is a cheaper Wallet Case the same part?
Only if materials, cycle life, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Wallet Case they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.