English specification desk How guides are written

Home / Mobile Accessories / How to specify a Wall Charger

Mobile Accessories

How to specify a Wall Charger

What to put on an RFQ for Wall Charger: the ratings, documents, and constraints that change the quote.

25 Oct 2026 · 4 min read · Tradinor Desk

Specification points for Wall ChargerTRADINOR · FIGUREWhat to lock for Wall ChargerMarketsInterfaceMechanical fitElectrical rating
Put these on the RFQ for Wall Charger before you compare prices.

A buyer searching for Wall Charger is usually trying to stop a bad substitute. A phone accessory is specified by the phone interface, the mechanical fit, and the electrical rating of the cable or charger. Fitment adjectives are not a specification. The notes below are selection criteria for a Wall Charger. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.

What has to be true of Wall Charger

A phone accessory is specified by the phone interface, the mechanical fit, and the electrical rating of the cable or charger. Fitment adjectives are not a specification. For a Wall Charger, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.

Wall Charger is easy to confuse with Action Camera Mount. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.

Numbers that change the quote

Line What to write for Wall Charger
Markets The plug and the radio or charger approvals for the countries of sale.
Interface USB-C, Lightning, or a magnetic alignment, and the current the cable is allowed to carry.
Mechanical fit Phone size range, case compatibility, and how it locks in a vehicle or on a desk.
Electrical rating Watts or amps, and whether USB Power Delivery is required.
Materials Skin contact materials, and a flammability note for anything that charges.
Cycle life Bends for a cable, or open-close cycles for a mount.

How to compare two offers

Lay both quotes for Wall Charger on one sheet and line up markets, interface, and mechanical fit. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Wall Charger with a cheaper line that omitted markets.

Documents worth having before the deposit

Ask for a compatibility list by phone model, not a photo of one handset. The file should name Wall Charger and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.

Failures that show up after delivery

  • Ignoring the case thickness the buyer’s phone will actually wear.
  • Assuming every USB-C cable can charge at the wattage printed on the adapter.
  • Specifying a car mount without the vent, dash, or vent-clip mechanical limit.

On a Wall Charger, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.

A worked RFQ line

Use this shape, then replace the brackets with your duty: “Wall Charger — Name the connector, the current, the phones it must fit, and the mechanical mount.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.

Where words like RoHS / CE belong

Searches often add a constraint to Wall Charger: RoHS / CE, or explosion-proof / ATEX. Keep those on this page. RoHS is a material limit. CE is a declaration that lists the rules relied on. Ask for the document that names this part number and revision. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.

Related in this section: how to specify Action Camera Mount.

Questions buyers actually ask

What should an RFQ for Wall Charger include?

Name the connector, the current, the phones it must fit, and the mechanical mount.

Is a cheaper Wall Charger the same part?

Only if markets, interface, and the documents match. A missing line is a different offer.

Do waterproof, OEM, or IP words need their own page?

No. For Wall Charger they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.