A buyer searching for Tunnel Light is usually trying to stop a bad substitute. A luminaire or lamp is specified by light output, color, the driver, and the environment around the optic. The notes below are selection criteria for a Tunnel Light. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Tunnel Light
A luminaire or lamp is specified by light output, color, the driver, and the environment around the optic. For a Tunnel Light, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Tunnel Light is easy to confuse with Bollard Light. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Tunnel Light |
|---|---|
| Lifetime | The hour figure and the lumen maintenance it refers to, such as L70. |
| Lumens and candela | Delivered light, not only the LED chip claim. |
| Color | Correlated color temperature and color rendering. |
| Driver | Current or power, dimming method, and where the driver sits. |
| Optics and mounting | Beam angle, and ceiling, wall, pole, or high bay. |
| Environment | IP code, ambient, and whether the fitting is indoors only. |
How to compare two offers
Lay both quotes for Tunnel Light on one sheet and line up lifetime, lumens and candela, and color. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Tunnel Light with a cheaper line that omitted lifetime.
Documents worth having before the deposit
Ask for a photometric file if the lighting layout depends on it. The file should name Tunnel Light and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Buying watts instead of lumens.
- Pairing a lamp with a dimmer the driver does not support.
- Using an indoor fitting outside because the photo was taken at dusk.
On a Tunnel Light, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Tunnel Light — State lumens, color temperature, driver type, beam, IP code, and ambient.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like waterproof / IP65 belong
Searches often add a constraint to Tunnel Light: waterproof / IP65, or explosion-proof / ATEX. Keep those on this page. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Bollard Light.
Questions buyers actually ask
What should an RFQ for Tunnel Light include?
State lumens, color temperature, driver type, beam, IP code, and ambient.
Is a cheaper Tunnel Light the same part?
Only if lifetime, lumens and candela, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Tunnel Light they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.