English specification desk How guides are written

Home / Security Products / How to specify a Strike Lock

Security Products

How to specify a Strike Lock

What to put on an RFQ for Strike Lock: the ratings, documents, and constraints that change the quote.

25 Oct 2026 · 4 min read · Tradinor Desk

Specification points for Strike LockTRADINOR · FIGUREWhat to lock for Strike LockStorageMountingRulesCoverage
Put these on the RFQ for Strike Lock before you compare prices.

A buyer searching for Strike Lock is usually trying to stop a bad substitute. A security device here means an overt camera, recorder, or alarm for a site you control. Specify coverage, light, storage, and the network. Do not use this as a guide to hide a camera or record people in private spaces. The notes below are selection criteria for a Strike Lock. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.

What has to be true of Strike Lock

A security device here means an overt camera, recorder, or alarm for a site you control. Specify coverage, light, storage, and the network. Do not use this as a guide to hide a camera or record people in private spaces. For a Strike Lock, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.

Strike Lock is easy to confuse with Baton. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.

Numbers that change the quote

Line What to write for Strike Lock
Storage Days of retention and where the drive sits.
Mounting Overt housing and the IP code of an outdoor camera.
Rules Whether signs, consent, or a local rule apply to this site.
Coverage What must be seen, at what distance, day and night.
Image Resolution and the low-light behavior, in the manufacturer’s terms.
Power and network PoE, mains, or the stated link.

How to compare two offers

Lay both quotes for Strike Lock on one sheet and line up storage, mounting, and rules. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Strike Lock with a cheaper line that omitted storage.

Documents worth having before the deposit

Ask for a lens calculator or a stated field of view, and keep the camera overt. The file should name Strike Lock and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.

Failures that show up after delivery

  • Buying resolution and forgetting light and storage.
  • Putting an indoor camera outside.
  • Specifying a hidden install. That is out of scope for this desk.

On a Strike Lock, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.

A worked RFQ line

Use this shape, then replace the brackets with your duty: “Strike Lock — State coverage, light, power, retention, and an overt mount.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.

Where words like waterproof / IP65 belong

Searches often add a constraint to Strike Lock: waterproof / IP65, or IP67. Keep those on this page. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.

Related in this section: how to specify Baton.

Questions buyers actually ask

What should an RFQ for Strike Lock include?

State coverage, light, power, retention, and an overt mount.

Is a cheaper Strike Lock the same part?

Only if storage, mounting, and the documents match. A missing line is a different offer.

Do waterproof, OEM, or IP words need their own page?

No. For Strike Lock they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.