A buyer searching for Stick Pack is usually trying to stop a bad substitute. Packaging is specified by the product it must protect, the distribution test, and the print. The notes below are selection criteria for a Stick Pack. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Stick Pack
Packaging is specified by the product it must protect, the distribution test, and the print. For a Stick Pack, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Stick Pack is easy to confuse with Foam Wrap. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Stick Pack |
|---|---|
| Size | Internal dimensions and the board or film grade. |
| Strength | ECT, burst, or a stated drop and stack test. |
| Barrier | Moisture or grease needs, if any. |
| Colors, the artwork revision, and the barcode. | |
| Closure | Tape, adhesive, or a zipper, and how the line erects it. |
| Recycling | The material claim you are prepared to print. |
How to compare two offers
Lay both quotes for Stick Pack on one sheet and line up size, strength, and barrier. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Stick Pack with a cheaper line that omitted size.
Documents worth having before the deposit
Ask for a drawing with flute or film and the dieline. The file should name Stick Pack and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Sizing the box to the product and forgetting void and drop height.
- Approving artwork without the barcode quiet zone.
- Claiming a recycle mark the local system does not accept.
On a Stick Pack, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Stick Pack — Write size, board or film, strength test, and artwork revision.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like outdoor belong
Searches often add a constraint to Stick Pack: outdoor, or RoHS / CE. Keep those on this page. Outdoor means UV, temperature cycle, and corrosion, not only a gasket. Name the climate and the years the gasket is expected to last. RoHS is a material limit. CE is a declaration that lists the rules relied on. Ask for the document that names this part number and revision. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Foam Wrap.
Questions buyers actually ask
What should an RFQ for Stick Pack include?
Write size, board or film, strength test, and artwork revision.
Is a cheaper Stick Pack the same part?
Only if size, strength, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Stick Pack they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.