A buyer searching for Security Tag is usually trying to stop a bad substitute. Packaging is specified by the product it must protect, the distribution test, and the print. The notes below are selection criteria for a Security Tag. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Security Tag
Packaging is specified by the product it must protect, the distribution test, and the print. For a Security Tag, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Security Tag is easy to confuse with RFID Tag Packaging. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Security Tag |
|---|---|
| Closure | Tape, adhesive, or a zipper, and how the line erects it. |
| Recycling | The material claim you are prepared to print. |
| Size | Internal dimensions and the board or film grade. |
| Strength | ECT, burst, or a stated drop and stack test. |
| Barrier | Moisture or grease needs, if any. |
| Colors, the artwork revision, and the barcode. |
How to compare two offers
Lay both quotes for Security Tag on one sheet and line up closure, recycling, and size. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Security Tag with a cheaper line that omitted closure.
Documents worth having before the deposit
Ask for a drawing with flute or film and the dieline. The file should name Security Tag and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Claiming a recycle mark the local system does not accept.
- Sizing the box to the product and forgetting void and drop height.
- Approving artwork without the barcode quiet zone.
On a Security Tag, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Security Tag — Write size, board or film, strength test, and artwork revision.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like OEM / custom belong
Searches often add a constraint to Security Tag: OEM / custom, or waterproof / IP65. Keep those on this page. OEM or custom means a drawing, a revision, and a statement of who owns the tool. Without those, you are buying the catalog part. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify RFID Tag Packaging.
Questions buyers actually ask
What should an RFQ for Security Tag include?
Write size, board or film, strength test, and artwork revision.
Is a cheaper Security Tag the same part?
Only if closure, recycling, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Security Tag they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.