A buyer searching for Putty is usually trying to stop a bad substitute. A building material is specified by the grade, the dimensions, the standard, and the exposure of the assembly. The notes below are selection criteria for a Putty. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Putty
A building material is specified by the grade, the dimensions, the standard, and the exposure of the assembly. For a Putty, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Putty is easy to confuse with Tile Grout. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Putty |
|---|---|
| Dimensions | Size, thickness, and tolerance. |
| Standard | The product standard the supplier will mark on the delivery. |
| Exposure | Interior, exterior, wet, or structural. |
| Fire and thermal | Any fire class or insulation value the assembly needs. |
| Traceability | Lot or mill documents when the work is structural. |
| Grade | Strength, class, or mix, using the name the standard uses. |
How to compare two offers
Lay both quotes for Putty on one sheet and line up dimensions, standard, and exposure. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Putty with a cheaper line that omitted dimensions.
Documents worth having before the deposit
Ask for the declaration of performance or the mill certificate the market expects. The file should name Putty and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Leaving moisture and storage out of a cement or timber order.
- Cutting a rated assembly and assuming the fire class survived.
- Accepting a visual match with a lower strength class.
On a Putty, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Putty — State grade, dimensions, standard, exposure, and documents.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like IP67 belong
Searches often add a constraint to Putty: IP67, or explosion-proof / ATEX. Keep those on this page. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Tile Grout.
Questions buyers actually ask
What should an RFQ for Putty include?
State grade, dimensions, standard, exposure, and documents.
Is a cheaper Putty the same part?
Only if dimensions, standard, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Putty they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.