A buyer searching for Proximity Sensor is usually trying to stop a bad substitute. An electronic part is specified by the electrical job, the package the assembler can solder, and the temperature inside the enclosure. The notes below are selection criteria for a Proximity Sensor. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Proximity Sensor
An electronic part is specified by the electrical job, the package the assembler can solder, and the temperature inside the enclosure. For a Proximity Sensor, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Proximity Sensor is easy to confuse with Photoelectric Sensor. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Proximity Sensor |
|---|---|
| Supply life | A second source or a stated longevity, not only today’s distributor stock. |
| Compliance file | RoHS declaration and any safety report, tied to the exact part number. |
| Voltage and current | Continuous ratings at the real ambient, plus the peak and how long it lasts. |
| Interface | Pinout, protocol, and whether levels are 3.3 V, 5 V, or a field signal such as 4–20 mA. |
| Package and mount | Footprint, pitch, and whether the assembler can rework it. |
| Temperature | Commercial versus industrial range, measured in the enclosure you will actually build. |
How to compare two offers
Lay both quotes for Proximity Sensor on one sheet and line up supply life, compliance file, and voltage and current. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Proximity Sensor with a cheaper line that omitted supply life.
Documents worth having before the deposit
Ask for the datasheet revision, a recommended footprint, and the moisture-sensitivity level if the part is surface-mount. The file should name Proximity Sensor and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Treating a logic-level input as if every power device fully enhances at 3.3 V.
- Leaving the second source unnamed until the first source goes on allocation.
- Buying the development-board part number instead of the production silicon.
On a Proximity Sensor, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Proximity Sensor — State voltage, continuous current, package, industrial temperature, and the datasheet revision.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like outdoor belong
Searches often add a constraint to Proximity Sensor: outdoor, or RoHS / CE. Keep those on this page. Outdoor means UV, temperature cycle, and corrosion, not only a gasket. Name the climate and the years the gasket is expected to last. RoHS is a material limit. CE is a declaration that lists the rules relied on. Ask for the document that names this part number and revision. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Photoelectric Sensor.
Questions buyers actually ask
What should an RFQ for Proximity Sensor include?
State voltage, continuous current, package, industrial temperature, and the datasheet revision.
Is a cheaper Proximity Sensor the same part?
Only if supply life, compliance file, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Proximity Sensor they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.