A buyer searching for Progressive Cavity Pump is usually trying to stop a bad substitute. A pump is specified at the duty point: flow, head, the liquid, and the power. The notes below are selection criteria for a Progressive Cavity Pump. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Progressive Cavity Pump
A pump is specified at the duty point: flow, head, the liquid, and the power. For a Progressive Cavity Pump, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Progressive Cavity Pump is easy to confuse with Pressure Switch Pump. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Progressive Cavity Pump |
|---|---|
| Installation | Flooded, suction lift, or submersible depth. |
| Seal | Mechanical seal or packing, and whether the liquid can leak. |
| Duty point | Flow and head together, not the maximum of each. |
| Liquid | What it is, the temperature, viscosity, and solids. |
| Materials | Casing, impeller, and seal matched to that liquid. |
| Power | Supply voltage and the power at the duty point. |
How to compare two offers
Lay both quotes for Progressive Cavity Pump on one sheet and line up installation, seal, and duty point. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Progressive Cavity Pump with a cheaper line that omitted installation.
Documents worth having before the deposit
Ask for the curve with the duty point marked. The file should name Progressive Cavity Pump and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Sizing on maximum flow at zero head.
- Using a water pump on a solvent or a slurry.
- Ignoring NPSH when the suction is difficult.
On a Progressive Cavity Pump, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Progressive Cavity Pump — Write flow, head, liquid, materials, and power.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like explosion-proof / ATEX belong
Searches often add a constraint to Progressive Cavity Pump: explosion-proof / ATEX, or outdoor. Keep those on this page. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. Outdoor means UV, temperature cycle, and corrosion, not only a gasket. Name the climate and the years the gasket is expected to last. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Pressure Switch Pump.
Questions buyers actually ask
What should an RFQ for Progressive Cavity Pump include?
Write flow, head, liquid, materials, and power.
Is a cheaper Progressive Cavity Pump the same part?
Only if installation, seal, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Progressive Cavity Pump they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.