A buyer searching for Name Plate is usually trying to stop a bad substitute. Office furniture and machines are specified by the workday, the size, and the electrical or paper interface. The notes below are selection criteria for a Name Plate. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Name Plate
Office furniture and machines are specified by the workday, the size, and the electrical or paper interface. For a Name Plate, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Name Plate is easy to confuse with Multifunction Printer. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Name Plate |
|---|---|
| Load or throughput | Weight, pages per minute, or filing volume. |
| Power and consumables | Electrical supply and the consumable you must keep buying. |
| Ergonomics | Adjustment range for chairs and desks, against a stated guide if you have one. |
| Service | Who fixes a machine on site. |
| Use | Hours per day and the user count. |
| Size | Fit in the room and, for seating, the adjustment range. |
How to compare two offers
Lay both quotes for Name Plate on one sheet and line up load or throughput, power and consumables, and ergonomics. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Name Plate with a cheaper line that omitted load or throughput.
Documents worth having before the deposit
Ask for a dimensioned drawing and a consumable list. The file should name Name Plate and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Forgetting the door width.
- Buying a home chair for an all-day desk.
- Ignoring consumable cost on a printer.
On a Name Plate, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Name Plate — State duty, dimensions, power or consumables, and service.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like explosion-proof / ATEX belong
Searches often add a constraint to Name Plate: explosion-proof / ATEX, or IP67. Keep those on this page. ATEX or IECEx is a certificate for a zone, a gas or dust group, and a temperature class. An IP rating does not grant it. Skip the mark if the site is not hazardous. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Multifunction Printer.
Questions buyers actually ask
What should an RFQ for Name Plate include?
State duty, dimensions, power or consumables, and service.
Is a cheaper Name Plate the same part?
Only if load or throughput, power and consumables, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Name Plate they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.