A buyer searching for Fairy Light is usually trying to stop a bad substitute. A luminaire or lamp is specified by light output, color, the driver, and the environment around the optic. The notes below are selection criteria for a Fairy Light. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Fairy Light
A luminaire or lamp is specified by light output, color, the driver, and the environment around the optic. For a Fairy Light, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Fairy Light is easy to confuse with Laser Light. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Fairy Light |
|---|---|
| Optics and mounting | Beam angle, and ceiling, wall, pole, or high bay. |
| Environment | IP code, ambient, and whether the fitting is indoors only. |
| Lifetime | The hour figure and the lumen maintenance it refers to, such as L70. |
| Lumens and candela | Delivered light, not only the LED chip claim. |
| Color | Correlated color temperature and color rendering. |
| Driver | Current or power, dimming method, and where the driver sits. |
How to compare two offers
Lay both quotes for Fairy Light on one sheet and line up optics and mounting, environment, and lifetime. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Fairy Light with a cheaper line that omitted optics and mounting.
Documents worth having before the deposit
Ask for a photometric file if the lighting layout depends on it. The file should name Fairy Light and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Buying watts instead of lumens.
- Pairing a lamp with a dimmer the driver does not support.
- Using an indoor fitting outside because the photo was taken at dusk.
On a Fairy Light, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Fairy Light — State lumens, color temperature, driver type, beam, IP code, and ambient.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like RoHS / CE belong
Searches often add a constraint to Fairy Light: RoHS / CE, or stainless / corrosion. Keep those on this page. RoHS is a material limit. CE is a declaration that lists the rules relied on. Ask for the document that names this part number and revision. Name the alloy or the coating and the chemical it must survive. Stainless is a family, not a guarantee. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Laser Light.
Questions buyers actually ask
What should an RFQ for Fairy Light include?
State lumens, color temperature, driver type, beam, IP code, and ambient.
Is a cheaper Fairy Light the same part?
Only if optics and mounting, environment, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Fairy Light they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.