A buyer searching for Door Lock is usually trying to stop a bad substitute. A fastener or fitting is specified by size, material, strength, and the corrosion around it. The notes below are selection criteria for a Door Lock. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Door Lock
A fastener or fitting is specified by size, material, strength, and the corrosion around it. For a Door Lock, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Door Lock is easy to confuse with Door Hinge. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Door Lock |
|---|---|
| Coating | Zinc, galvanize, or another coat matched to the environment. |
| Quantity and lot | Batch traceability if the assembly is safety related. |
| Size and thread | Diameter, pitch, length, and the standard of the thread. |
| Material | Steel grade, stainless alloy, or brass, not only the color. |
| Strength | Property class or a stated tensile figure. |
| Head and drive | Head style and the driver the line already uses. |
How to compare two offers
Lay both quotes for Door Lock on one sheet and line up coating, quantity and lot, and size and thread. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Door Lock with a cheaper line that omitted coating.
Documents worth having before the deposit
Ask for the material certificate when the joint is structural. The file should name Door Lock and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Choosing a coating that the chemical on site strips.
- Leaving thread pitch off the order.
- Substituting a similar head with a lower property class.
On a Door Lock, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Door Lock — Write size, thread, material, property class, and coating.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like OEM / custom belong
Searches often add a constraint to Door Lock: OEM / custom, or RoHS / CE. Keep those on this page. OEM or custom means a drawing, a revision, and a statement of who owns the tool. Without those, you are buying the catalog part. RoHS is a material limit. CE is a declaration that lists the rules relied on. Ask for the document that names this part number and revision. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Door Hinge.
Questions buyers actually ask
What should an RFQ for Door Lock include?
Write size, thread, material, property class, and coating.
Is a cheaper Door Lock the same part?
Only if coating, quantity and lot, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Door Lock they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.