English specification desk How guides are written

Home / EV Products / How to specify a CHAdeMO Adapter

EV Products

How to specify a CHAdeMO Adapter

What to put on an RFQ for CHAdeMO Adapter: the ratings, documents, and constraints that change the quote.

25 Oct 2026 · 3 min read · Tradinor Desk

Specification points for CHAdeMO AdapterTRADINOR · FIGUREWhat to lock for CHAdeMO AdapterDeclarationPowerConnectorInstallation
Put these on the RFQ for CHAdeMO Adapter before you compare prices.

A buyer searching for CHAdeMO Adapter is usually trying to stop a bad substitute. EV charging hardware is specified by power, the connector, the supply, and who may install it. The notes below are selection criteria for a CHAdeMO Adapter. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.

What has to be true of CHAdeMO Adapter

EV charging hardware is specified by power, the connector, the supply, and who may install it. For a CHAdeMO Adapter, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.

CHAdeMO Adapter is easy to confuse with RCD for EV Charger. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.

Numbers that change the quote

Line What to write for CHAdeMO Adapter
Declaration The charging-equipment declaration for the market.
Power Kilowatts, single or three phase, and the supply available on site.
Connector Type 2, CCS, CHAdeMO, or the adapter, matched to the vehicles.
Installation Wall, pedestal, or portable, and indoor or outdoor IP code.
Protection Residual current and overcurrent as the local electrical rules require.
Network Whether billing or load management needs a back office.

How to compare two offers

Lay both quotes for CHAdeMO Adapter on one sheet and line up declaration, power, and connector. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified CHAdeMO Adapter with a cheaper line that omitted declaration.

Documents worth having before the deposit

The conductive-charging series IEC 61851 is the usual reference. Confirm the part of it cited on the declaration. The file should name CHAdeMO Adapter and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.

Failures that show up after delivery

  • Ignoring the building supply and expecting the nameplate kilowatts.
  • Leaving residual-current protection to be invented on site.
  • Buying a connector the fleet does not have.

On a CHAdeMO Adapter, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.

A worked RFQ line

Use this shape, then replace the brackets with your duty: “CHAdeMO Adapter — State kilowatts, phases, connector, IP code, and the supply.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.

Where words like waterproof / IP65 belong

Searches often add a constraint to CHAdeMO Adapter: waterproof / IP65, or stainless / corrosion. Keep those on this page. IP65 in IEC 60529 means dust-tight and protected against water jets. Write that code if hoses are the real exposure. The word waterproof alone does not name a test. Name the alloy or the coating and the chemical it must survive. Stainless is a family, not a guarantee. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.

Related in this section: how to specify RCD for EV Charger.

Questions buyers actually ask

What should an RFQ for CHAdeMO Adapter include?

State kilowatts, phases, connector, IP code, and the supply.

Is a cheaper CHAdeMO Adapter the same part?

Only if declaration, power, and the documents match. A missing line is a different offer.

Do waterproof, OEM, or IP words need their own page?

No. For CHAdeMO Adapter they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.