A buyer searching for Button Cell is usually trying to stop a bad substitute. A battery is specified by chemistry, voltage, capacity at a stated discharge, and the management or charger that must match it. The notes below are selection criteria for a Button Cell. They are not a catalog promise. Confirm every rating on the current datasheet, drawing, or test report for the revision you will receive.
What has to be true of Button Cell
A battery is specified by chemistry, voltage, capacity at a stated discharge, and the management or charger that must match it. For a Button Cell, start from the duty, then the interface to the rest of the machine or the room, then the document that proves the claim. A lower price that leaves one of those blank is a different product.
Button Cell is easy to confuse with Battery Cable. If the quote could be read as either, add the line that separates them: the rating, the fitment, or the standard named below. Link the drawing number to that line so receiving inspection can reject the wrong one.
Numbers that change the quote
| Line | What to write for Button Cell |
|---|---|
| Management | Who supplies the BMS, and which charger profile is allowed. |
| Transport | Lithium shipments follow dangerous-goods rules. Include that in the cost. |
| Chemistry | Lead-acid, LiFePO4, or another lithium family. Lithium is not one part. |
| Voltage and capacity | Nominal voltage and amp-hours at a stated discharge rate. |
| Current | Continuous and peak discharge, and maximum charge current. |
| Temperature | Operating and charging limits. Cold charging can destroy some lithium cells. |
How to compare two offers
Lay both quotes for Button Cell on one sheet and line up management, transport, and chemistry. If a cell is empty, the offer is not finished. Ask for the missing line in writing. When those match, the honest difference is lead time, the test evidence, and who carries the warranty. Do not average a fully specified Button Cell with a cheaper line that omitted management.
Documents worth having before the deposit
UN 38.3 is the usual transport test for lithium cells and batteries. Ask for the pack, not only the cell. The file should name Button Cell and the revision, not only the supplier’s homepage. A factory quality certificate such as ISO 9001 can sit beside that file. It does not replace it.
Failures that show up after delivery
- Using a starter battery for a deep daily cycle.
- Reading capacity at a gentle lab discharge and expecting it at a high current.
- Charging lithium on a lead-acid profile.
On a Button Cell, the expensive version of the first mistake is discovering it after the goods are in the crate. Put the rejection condition in the purchase order while the supplier can still restate the offer.
A worked RFQ line
Use this shape, then replace the brackets with your duty: “Button Cell — Name chemistry, voltage, amp-hours, continuous current, temperature, and BMS.” That sentence is a template, not a rating of any brand. If a supplier’s datasheet uses different units, convert them onto this sheet so the next offer can be compared.
Where words like stainless / corrosion belong
Searches often add a constraint to Button Cell: stainless / corrosion, or IP67. Keep those on this page. Name the alloy or the coating and the chemical it must survive. Stainless is a family, not a guarantee. IP67 is dust-tight plus a defined temporary immersion. It is not a rating for living underwater, and it says nothing about sunlight or salt. If you need a third constraint, add it as another line on the same drawing. A second URL that only swaps the adjective does not give a buyer a second fact.
Related in this section: how to specify Battery Cable.
Questions buyers actually ask
What should an RFQ for Button Cell include?
Name chemistry, voltage, amp-hours, continuous current, temperature, and BMS.
Is a cheaper Button Cell the same part?
Only if management, transport, and the documents match. A missing line is a different offer.
Do waterproof, OEM, or IP words need their own page?
No. For Button Cell they are extra lines on this specification. Ask for the test or the drawing that gives the word a value.